Skip to content

Untangling a robot cable safely, as the manual says

Checked November 20, 2026

Straightening a twisted cable is mostly patience. The hard part is knowing what not to do.

Before you touch the cable

Get the robot out of the pool the way the maker says. Pentair's guide for its Prowler 710 gives a clear order. Unplug the robot's floating cable from the power supply. Then use the cable to gently pull the cleaner toward you. Once it's within reach, lift it out using the handle only.1

The same page has a caution. Lifting the robot out by its cable may damage the cable badly enough to need costly repairs.1

Pentair also says to keep the cleaner on all four wheels, so water drains from its body properly.1

Your model may differ, so follow your own manual's steps for taking it out.

Straightening a twisted cableUnplug and lift robot out by handlePull the whole cable out of the waterLay it straight in the sunCheck the twist has eased
Power off and out of the water first, then let the cable relax.

Why it springs back

Know the enemy. Beatbot says a stored cable holds its stored shape, then loops up again in the pool.2

That's why a quick shake-out rarely holds. The curl is built into the jacket. It needs time to relax.

Letting the twist relax

Beatbot's advice for a cable that keeps springing back is to unwind it completely. Then lay it straight on a flat surface for two to three hours, preferably on a warm and sunny day.2

Heat softens the outer jacket a little, which can ease the tension inside. That's Beatbot's reasoning, and it's for a cable that's out of the water and not being used.2

If it's still twisted, Beatbot suggests letting the cable float freely in the pool overnight. There's a condition: only if the manufacturer allows the cable to be separated from the robot. If your manual doesn't say that, don't do it.2

The next day, Beatbot says to take the cable out slowly, stretch it along its full length, and check whether the twisting has eased.2

What the manuals warn against

Short list. Read it twice.

  • Don't leave the cable in tight loops. Beatbot says not to tie it with cable ties or leave it in tight loops when you let it float overnight in the pool.2
  • Don't cut it. Beatbot's words are "Never cut the cable yourself."2
  • Don't lift the robot by the cable. Pentair says it can damage the cable.1

When the twist keeps coming back

If the twist returns after you've straightened the cable, look at the swivel next. The swivel page has a quick check.

At the end of the season, Pentair's guide says to completely untangle the floating cable and then properly coil it.3 For how to coil it, see coiling and storing.

If you see damage while you work, such as a split jacket or visible wires, stop. The wear and damage page covers what makers advise.

Cited material

  1. Pentair 710 User Manual, page 13 (Removing the cleaner from the pool), Pentair
  2. Robotic Pool Cleaner Cable Keeps Tangling: Causes and Fixes, Beatbot
  3. Pentair 710 User Manual, page 15 (In-season and off-season storage), Pentair