Skip to content

Reading list

  1. Why pool robot cables tangle

    Cable memory, too much cable in the water and a swivel that won't turn are the usual reasons a corded pool robot's cable twists and knots.

  2. What a swivel connector does on a pool robot cable

    A swivel lets the cable turn when the robot turns, so twist doesn't build up. Here's how to check one and what makers say about replacing it.

  3. Cable length and pool size: what makers say

    How much cable a pool robot needs, what too long or too short does, and where makers say to place the cable and power supply in the pool.

  4. Untangling a robot cable safely, as the manual says

    How makers say to straighten a twisted pool robot cable, and what the manuals warn you not to do while you work on it or lift the robot.

  5. Laying out and storing the cable between runs

    How makers say to lay the cable out before a run and coil or store it afterward, so it doesn't pick up memory, kinks or sun damage.

  6. Power supply placement and cable rules from the manuals

    Where makers say the pool robot's power supply must sit, what outlet it needs, and who to ask if no outlet is close enough.

  7. Signs of cable wear and damage, and what makers advise

    What makers say wears out a pool robot cable, when a damaged one needs replacing, and why you shouldn't lift the robot by its cable.